工程、建築與設計 Archives - 頁24，共698 - AsiaEdit

200,000+

編修的論文
10,000+

服務過的作者
500+

支持的機構
25+

經驗年期

成功故事

成功出版

We edit for clients at over 500 universities in Hong Kong, mainland China and further through Asia and the world, with more adding to that number every day.

獲取免費報價編修費用估算

學科	雜誌	發表論文	作者	由	發布日期
工程、建築與設計	Building and Environment	Application of a multi-variable optimization method to determine lift-up design for optimum wind comfort	Professor Cheuk Ming Mak	Hong Kong	1/10/2018
工程、建築與設計	Building and Environment	Characterizing dynamic transmission of contaminants on a surface touch network	Professor Yuguo Li	Hong Kong	15/12/2017
工程、建築與設計	Building and Environment	Model development of heat/mass transfer for internally cooled dehumidifier concerning liquid film shrinkage shape and contact angles	Mr Chuanshuai Dong	Hong Kong	12/7/2016
工程、建築與設計	Building and Environment	Revisit of prevailing practice guidelines and investigation of topographical treatment techniques in CFD-Based air ventilation assessments	Dr. Jimmy Fung	Hong Kong	12/5/2019
工程、建築與設計	BMC Chemical Engineering	Incorporation of Cu3BTC2 nanocrystals to increase the permeability of polymeric membranes in O2/N2 separation	Professor Tae-Hyun Bae	Singapore	30/1/2019
工程、建築與設計	Bioresource Technology	Magnetic biochar for environmental remediation: A review	Dr. Eric Tsang	Hong Kong	21/11/2019
工程、建築與設計	Biotechnology & Bioengineering	Outline-etching image segmentation reveals enhanced cell chirality through intercellular alignment	Dr Miu Ling Lam	Hong Kong	30/6/2018
工程、建築與設計	Bioresource Technology	Performance and bacterial community of moving bed biofilm reactors with various biocarriers treating primary wastewater effluent with a low organic strength and low C/N ratio	Professor Xiao-yan Li	Hong Kong	5/4/2019
工程、建築與設計	Bioprocess and Biosystems Engineering	Two-stage pH control combined with oxygen-enriched air strategies for the highly efficient production of EPA by Mortierella alpina CCFM698 with fed-batch fermentation	Dr Haiqin Chen	China	5/6/2020
工程、建築與設計	Automation in Construction	Image-driven fuzzy-based system to construct as-is IFC BIM objects	Mr Sanghoon Lee	Hong Kong	4/5/2018
工程、建築與設計	Automation in Construction	Technical requirements of age-friendly smart home technologies in high-rise residential buildings: A system intelligence analytical approach	Dr Johnny Wong	Hong Kong	11/8/2016
工程、建築與設計	Atmospheric Environment	The significance of incorporating unidentified vessels into AIS-based ship emission inventory	Dr Jimmy Fung	Hong Kong	2/6/2019
工程、建築與設計	Automation in Construction	BIM-based method calculation of auxiliary materials required in housing construction	Mr Haitao Wei	China	2/7/2017
工程、建築與設計	Architecture and Culture	Chikan’s Arcade Buildings: The Hybrid and Civil Architecture of Lingnan	Dr Henri Tung	Hong Kong	12/11/2018
工程、建築與設計	Atmosphere	Heterogeneous Uptake of N2O5 in Sand Dust and Urban Aerosols Observed during the Dry Season in Beijing	Dr Men Xia	Hong Kong	18/4/2019
工程、建築與設計	Applied Thermal Engineering	Computational fluid dynamics of steam flow in a turbine control valve with a bell-shaped spindle	Professor Yingzheng Liu	China	24/10/2017
工程、建築與設計	Applied Thermal Engineering	Theoretical and experimental study of a synchronal rotary multiphase pump at very high inlet gas volume fractions	Dr Xu Yang	China	31/8/2016
工程、建築與設計	Applied Thermal Engineering	Estimation of soil and grout thermal properties for ground-coupled heat pump systems: Development and application	Dr Gongsheng Huang	Hong Kong	18/7/2018
工程、建築與設計	Applied Thermal Engineering	Comparative analysis of U-pipe location on the sizing of borehole heat exchangers	Dr Linfeng Zhang	Hong Kong	1/9/2019
工程、建築與設計	Applied Thermal Engineering	Effects of natural gas, ethanol, and methanol enrichment on the performance of in-cylinder thermochemical fuel reforming (TFR) spark-ignition natural gas engine	Dr Lei Zhu	China	6/4/2019